- Lime Products
- About us
Prices quoted exclude VAT, which will be charged at the current rate. Prices are for guidance only - please contact us to confirm price before placing order.
Hot Lime Mortar uses local and national haulage companies. They will take up to 1000Kgs on a pallet. Tail lift and Hiab Wagons are available. Please ask for a quote.
This mortar is suitable for pointing, building, rendering and plastering. The mortar has been matured for at least three months so it is ideal for plastering.
Cardewmires aggregate 2.5:1: £152 per tonne box
Cardewmires aggregate 2.5:1: £8 per 22kg bucket
Cardewmires aggregate 1.5:1: £165 per tonne box
Cardewmires aggregate 1.5:1: £9 per 22kg bucket
Nosterfield aggregate 2.5:1 £157 per tonne box
Nosterfield aggregate 2.5:1 £8 per 22kg bucket
Nosterfield aggregate 1.5:1 £170 per tonne box
Nosterfield aggregate 1.5:1 £9.50 per 22kg bucket
This mortar is suitable to apply on the underneath side of the slates on a roof.
Parging mix: £155 per tonne
Parging mix: £8.50 per 22kg tub
Lime skim: £18 per 22kg
Lime Putty: £15 per 23kg bucket
Lime Putty: £400 per 800kg dumpy bag
See the Insulation page for more information.
We are agents for this premier ecological alternative insulation product.
Please email/call for measurements, U values and requirements for your floor.
2m3 bags: Please call for up to date prices; bags will be split depending on your requirements
Quick Lime (5mm): £170 per 1 tonne bag
Quick Lime (5mm): £12 per 19kg bucket
Otterbein NHL3.5 £13 per 25kg bag
Otterbein NHL5 £13 per 25kg bag
Dyes/Pigments can be added to the limewash. Please contact Eden to discuss the range of colours. Normally available – Yellow Ochre, Burnt Sienna, Raw Sienna, Turkey Umber, Burnt Turkey and Venetian Red.
The colour depends on how much pigment you add to the lime.
Lime Paints/Dyes £14 per kg
These are gritty sands with a good variation of finings.
Washed Cardewmires sand: £45 per tonne
Washed Cardewmires sand: £3 per 25kg
Nosterfield grit sand: £50 per tonne
Nosterfield grit sand: £3 per 25kg
Yellow and red sand: £34 per tonne
Silica sand £7 per 25kg bag
Pozzolans: Argical-M 1000 is a reactive pozzolan (a powdered additive made from burnt clay) used to achieve a hydraulic set in traditional lime putty mortars and plasters.
See the Pozzolans page for more information.
Argical-M 1000 £19 per 25kg
Wood wool boards, available in 15mm and 25mm.
15mm x 1200 x 600: £6.00
25mm x 1200 x 600: £7.20
Washers (box of 100): £13.50
Oak Laths (sawn): £0.45 per running metre
We are suppliers for NBT of internal woodfibre insulation - Pavatex range - Pavadentro.
See Pavatex page for more information.
20mm cork board - Egrid (4m x 50m - 200m²): £3 per sq m
Geotextile membrane 4.5 m wide: £2.60 per running metre
Eden is an agent for the Keim range of internal and external breathable hardwearing
paints. Keim Soldalit & Royalan paints are used externally, the Optil and Ecosyl ranges can be used internally onto new lime plasters. Please contact Eden for a colour chart and price.
See the Keim Paints page for more information.
This material is ideal to protect the lime mortar from drying out to quickly as well as keeping direct sunlight & rain from the mortar.
Hessian Sheets: 46m x 1.37m £60
The laths should have a spacing of approx. 6mm, this lets the mortar through the gap to give a good hold.
One square meter require 31 laths.
Sawn Oak Laths: £0.45 per running metre
Animal hair has to be used in the plaster for listed properties. The hair helps to bind the mortar. When looking at old plasters you can often see cow, horse and goat hair, in instances where there is no hair it is often the area which has failed.
Goat Hair: £3 per bundle
Fibres are ideal to mix in with Lime Plaster and Lime Render Mortars, they disperse very easily in the mortar and help bind the mortar and prevent shrinkage. They are a quicker alternative than the animal hair but it is a personal preference as to which you use.
£10 per kg
These are not the normal churn brushes that are found in hardware stones, they are
specifically designed to finish the lime pointing.
90 and 80 litre models available to hire.
See the Baron Mixer Hire page for more information.
Baron Mixer Hire – starting from: £70 per week
Eden Lime Mortar run training days for Builders, Architects, DIY enthusiasts in the use of lime mortars.
See the Training page for more information.
Lime renders/harls and plasters need a breathable paint or lime wash as final coat. Lime wash was always done via a hot wash- slaking the lime on site and applying straight away. The lime wash can have dyes/pigments added to give different shades. Lime wash is put on in thin coats one day between coats. Lime wash can be applied once the mortar is firm enough to take a brush. Lime wash also acts as a disinfectant as farmers always used to lime wash their cow byres and calf sheds to keep the bugs down! Lime wash acts as a conserver of the render it is good practice to do external walls every 3 or 4 years, but in some cases it lasts for decades.
Limewash is put on hot, it is a much better practice compared to adding water to lime putty. The secret to limewash is to damp down the wall before each coat, keeping the layers thin, doing one coat/day and wearing the correct PPE. External lime wash should be done in the Summer months, but not on really hot or windy days, lime wash needs to carbonate slowly, it will often need protection with the help of hessian sheets.
Hawks, Floats, Sponges, Leca aggregate, Pointing brushes and Burnt Lime.
Pointing tools: £10.00 each
Ebony gloves: £10.00
Eye protection glasses: £7.00
Mortar remover - ideal for taking old lime mortar out of joints: £8